Product Details
PRODUCT USES
- To protect chassis or undersides and fenders of cars, vans, trucks from rust. Also provides excellent petrol and oil resistance.
- Substrates: Suitably prepared ferrous metals.
- The product can be applied by: Spray or brush.
- Mixing Ratio: Ready for Use for Brushing. Dilute up to 20% by volume with Industrial Thinner for spraying Application Viscosity: 20 -22 seconds B4 Cup @25oC
- Application Pressure: 45 -50 PSI
- Spreading Capacity per coat: Depends on film thickness applied, surface porosity, imperfections, application method & wastage during painting. 8 – 12 m²/l per coat.
- Brushing gives thicker coats and less wastage.
- Spraying gives better finish, thinner coats and more wastage (up to 50%) Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
- Rapid drying.
- Good water and corrosion resistance.
- Limited abrasion resistance
You May Also Like
Similar products you might be interested in
