Product Details
- Protection and decoration of back side of coil coated metal.
- The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, measured near the substrate. Good ventilation is required in confined areas to ensure proper drying. The moisture content in the substrate should not exceed 3% (by weight). The coating should not be exposed to oil, chemicals or mechanical stress until fully cured.
- Thinner & equipment cleaner: Methyl Ethyl Ketone (MEK)
- Thinning: Supplied Ready For Use.
- Stoving Times: 40 sec at 220 to 235oC.
- Theoretical WFT: 10 – 20 µm. Process WFT can vary depending on roller speed settings.
- The product can be applied by: Reverse Roller coating
- Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting
- Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
- Good adhesion and flexibility.
- Good corrosion, chemical, abrasion and moisture resistance.
You May Also Like
Similar products you might be interested in
