Product Details
Additional Information
PRODUCT USES:
- As a “holding” primer to provide protection against corrosion during the fabrication period. A coat of conventional rust inhibiting metal primer should be applied over the Etch Primer, within a one-month period, where severe corrosive conditions, particularly in coastal regions are present or evident.
- Substrates: Galvanised steel, stainless steel, hard polished alloys, aluminium, plastic and fibreglass.
- Thinner & equipment cleaner: Standard Thinner.
- Dilution Ratio: Supplied ready for use – no thinning required. Stir well before use and intermittently during use. Drying Times: Touch dry: 20 minutes. Through dry: <1hr Recoatable: <4hrs.
- The product can be applied by: Brush, roller or spray
- Spreading Capacity per coat: Depends on film thickness applied, type of texture, surface porosity, imperfections, temperature & wastage during painting 18-20 m2/l when applied by brush or spray on smooth surfaces. 10-12 m2/l when applied to blast cleaned surfaces at 12µm DFT. Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
- Maximum adhesion on galvanized surfaces, ferrous and non-ferrous metals.
- Provides limited protection during fabrication.
- Quick drying.
- High spreading capacity.
- Ideal where chemical preparation is impractical.
You May Also Like
Similar products you might be interested in
